The Schuco Roof Terrace System PRC 50 offers a wide range of options with simple fabrication. The Schuco PRC 50 (patio roof construction) is a non-insulated system solution for terrace and carpot roofs. The construction method with structural components on the inside is based on the Schuco Conservatory System CMC 50, and allows the construction of elegant and highly cost-effective aluminium roofs.
Modular construction of roof profiles and eaves with a minimum of individual components.
Outstanding thermal insulation due to the low Uf values (1.0 W/m2K) up to 1.6 W/m2K of rafters and transoms.
All the usual conservatory types may be constructed.
Internal structural components for attractive appearance.
Minimum storage requirements due to the modular system.
The gaskets are partially inserted in the profiles.
Fabrication is possible with only a few hand tools.The profiles are straight cut.
In addition to a conventional mono-pitch roof, corner constructions, gable roofs and car ports can alos be built.
Larger sizes up to 6.5 meters projection can be easily installed in the system using reinforced eaves and rafter profiles.
Schuco balconies provide additional comfort and an additional space in the open.
Aluminium balconies are unbeatable, particularly in terms of weather resistance and durability.In addition, they also offer maximum design freedom and perfect system compatibility. These balconies are the economical option for new-build installation of retrofits.
Increasing property value.
Numerous design options with any floor plan and a variety of system additions.
Up to five storeys one above each other possible, choice of round or rectangular supports or supports with a steel look.
The coated aluminium provides extreme weather resistance and lasting value.
On four or two supports fixed to the façade with wall anchors.
Choice of round or rectangular supports or supports with a steel look.
Balcony extensions, built-on balconies and stacked balconies are also possible.
The comprehensive range of system accessories ensures an efficient fabrication process.
Profiles prepared for an inclination of 8,5°(15%)
Maximum light coverage: 4.800 mm
Minimum light coverage: 3.100 mm
Light width: Unlimited when joining modules
- 25 mm cellular polycarbonate
- 24 mm panel sandwich
- 24 mm glass. (4 tempered/ 12 /4+4)
: Frame 133 mm, Sash 28 mm
: Sash 1,5 mm
Opening modes: Slider: 2 sash 1 fix module and multiple falls
Width (L)= 2.300 mm (polycarbonate and panel sandwich), 1.200 mm (glass)
Height(H)= 1.600 mm
Maximum weight / sash 75 Kg
Non flood covered area watertightness
During the 6 hours test, end of test and 24 hours following the same, no drips or humidity were detected in the enclosed area.
Test reference: 4300 x 41600 mm in 3 adjustable rows, 9 sashes and 4/12/4+4 glass
* Unlimited colour range
* Colour powder coating (RAL, mottled & rough)
* Wood effect powder coating
* Anti-bacterial powder coating
© The pictures are the property of Schüco International.